BendPak
BendPak HDS-18E 18,000lb 4 Post Lift
BendPak HDS-18E 18,000lb 4 Post Lift
Couldn't load pickup availability
HDS-18E 18,000lb 4 Post Lift by BendPak
The demands of heavy-duty vehicle lifting can challenge even the most equipped garages. Whether it's managing long-wheelbase trucks, industrial equipment, or compact vehicles, versatility and durability are non-negotiable. Without the right tools, you risk inefficiencies and safety concerns that slow down productivity.
The BendPak HDS-18E rises to the occasion with an 18,000-lb. lifting capacity and advanced engineering built for rigorous use. Its extended runways accommodate vehicles of all sizes, while features like 12” dual-hub sheaves, galvanized lifting cables, and adjustable locking positions ensure durability and ease of use. Paired with a maintenance-free electric-hydraulic system and optional rolling bridge jacks, this lift streamlines operations, making it a trusted solution for professionals handling heavy-duty challenges.
4 Post Lift HDS-18E Specification
Capacity
- Lifting Capacity: 18,000 lbs.
- Max Capacity per Axle: 9,000 lbs.
Rise
- Min. Runway Height: 9.5 inches
- Max. Rise: 60 inches
- Max. Lifting Height: 69.5 inches
- Time to Full Rise: 75 seconds
Outside Dimensions
- Overall Width: 153.5 inches
- Overall Length: 312.75 inches
- Height of Columns: 91.25 inches
Inside Dimensions
- Width Between Columns: 133.5 inches
- Drive-Thru Clearance: 109 inches
Runways
- Width: 22 inches
- Length: 255.5 inches
- Width Between Runways: 40 or 45.25 inches
Minimum Wheelbase
- Rated Capacity: 185 inches
- 75% Capacity: 160 inches
Locking
- Locking Positions: 13
- Lock Spacing: Every 4 inches
Power Unit
- Motor: 220 VAC / 60 Hz / 1Ph
- Noise: 45 dB
Shipping
- Weight: 6,003 lbs.
- Dimensions: 266 x 27 x 36 inches
HDS-18E 18,000lb 4 Post Lift Special Features
- 27,000-lb. lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Supersized 12" diameter cable sheaves
- Galvanized lifting cables
- Grease nipples
- Single hydraulic under-runway cylinder
- Integrated flow restrictor
- Durable powder coat
- Spring-loaded safety locks
- Second lock system on constant guard
- Fully enclosed lifting cables
- Multiple adjustable height locking positions
- Maintenance-free electric hydraulic power system
- Conveniently positioned operator controls
-
Warranty
- 5 Year - Lift Structure
- 2 year - Hydraulic Unit & Power Unit
- 1 Year - Electrical and Operating Components
- *Reasonable labor costs covered for first 12 months
BendPak HDS-18E Documentation
BendPak HDS-18E 18,000lb 4 Post Lift Optional Item(Sold Separately)
- RBJ18000 18,000lb Rolling Bridge Jack or
- RJ9W 9,000lb Rolling Bridge Jack
- 12" x 12" base plates
- Stainless Steel Lifting Cables
- Push-Button Pneumatic Lock Release
- Grease Nipples
- Integrated Flow Restrictor
- Secondary Lock System
- Spring-Loaded Safety Locks
- Durable Matte Finish Runways
Warehouse Pickup Locations: $1500 Pickup Discount Available - Contact us for more information!
- Santa Paula, CA 93060
- Theodore, AL 36582

A - Min. Runway Height: 8.25" (210 mm)
B - Max. Rise: 58" (1,473 mm)
C - Max. Lifting Height: 69.5" (1,765 mm)
D - Overall Width: 153.5" (3,899 mm)
E - Outside Length: 257" (6,528 mm)
F - Overall Length: 312.75" (7,944 mm)
G - Height of Columns: 91.25" (2,318 mm)
H - Width Between Columns: 133.5" (3,391 mm)
I - Drive-Thru Clearance: 109" (2,769 mm)
J - Runway Width: 22" (559 mm)
K - Length of Runways: 257.5" (6,541 mm)
L - Width Between Runways: 40" (1,016 mm) or 45.5" (1,156 mm)
M - Runway Centerline: 62" (1,575 mm) or 67.5" (1,715 mm)
N - Outside Edge of Runways: 84" (2,134 mm) or 89.5" (2,273 mm)
Share
